Website News

A Mach3 Video Series, with CNC Control Software, that is on a Stomp Pad from design to completion is now released on a new Category page on CNC Information website. The CNC Control Video’s shows a CNC Project on a Snowboard Stomp Pad through 10 easy to follow videos. Video’s 1-5 now has a transcript for added learning and understanding.

CAM and SheetCAM CNC Video’s are few and far between, but Ivan Irons from the CNC Information website has created and released a 10 step stomp pad Video series that is now located on his website under a CNC Video’s Stomp Pad category page. This page houses all 10 videos from the CNC Stomp Pad Project. Ivan has also taken the time to create transcripts for all 10 videos so viewers can review the step-by-step CNC design process on their own. The new category page can be found at.

Here is a brief description of what each video entails:
Video 1: An overview of the CNC Project that is shot in a tutorial sequence.

Video 2: Ivan uses Adobe Illustrator to sketch it out and prepare the design.

Video 3: This video starts with the design in CAD.

Video 4: Ivan sets the CAM Programming parameters in SheetCam and the GCode is finalized.

Video 5: Ivan reviews the G-Code in Mach3 to ensure there are no problems.

Video’s 6 through 10 are set to be transcribed by the end of this month. However, the video’s can still be viewed in the meantime, without the transcripts.
Ivan is committed to share is passion for CNC with the world. Its rare that you find the complete CNC process laid out from start to finish with such a unique process. Ivan share’s his insights and experience with the beginner CNCer in these Stomp Pad Video’s. The videos are located on Ivan’s Community CNC Website to help others learn CNC. View the video’s and transcripts for free at:

You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.